Full Spectrum.

The Aquaknight V2 has 12 3watt Cree LEDs for a total of about 36watts of power.

Channel A

5x450nm Royal Blue, 
1x420nm Violet,SemiLED

Channel B

4x7500K Cool White,

Channel C

2x480nm Cool Blue, 

Intuitive Controls.

The Aquaknight V2 is controlled using 4 touch sensitive buttons and an LCD screed on top of the light. Each channel is individually controllable, and the controller has a built in ramping function.

You program the light by setting times, 1, 2, and 3 for each of the same channels. Time 1 is the starting time, and all channels should be set to 0. Time 2 is the peak hour, it should be the center of your daily program and have your desired settings for channels A, B, and C. Time 3 is your off time, and all channels should be set to 0. Your light will automatically ramp up from time 1 to time 2, then ramp down from time 2 to time 3. This emulates a full sunrise and sunset.

Simple Installation.

The included tank mounting bracket works with any tank with a rim less than 1″ in width. It is adjustable and can be used on tanks up to 24″ front to back. The Angle of the mounting arm sets the light to the ideal height over the water based on the width of your tank. As you slide your light towards the center of your aquarium, it also rises higher above the water level.

Slim Profile.

The Aquaknight LED is a purpose-built nano/pico reef light. Each light measures 4.25″ in diameter by 1.25″ tall.

Each Aquaknight V2 is designed to cover a 12″ cube for SPS, or an 18″ cube area for a mixed reef/soft corals.